hueforge representing the farewell of the going merry

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.8x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA Smartmaterials Black Transmission Distance: 0.3
PLA Smartmaterials Red Transmission Distance: 4
PLA Sakata 850 Yellow Transmission Distance: 6
PLA Smarmaterial recicled White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.