Bring the magic of Easter to life with this stunning 3D Illusion Painted Rabbit! 🐰✨

This model is created using Hueforge technology, which uses layered filament to build a vibrant, painted image that pops right off the build plate. It’s not just a print; it’s a piece of art ready to hang on your wall, sit on a shelf, or add a festive touch to your Easter basket.

Printing Instructions:

• Technology: Hueforge 
• Colors: This file is pre-painted with filaments! Use the exact colors listed in the 3D file or experiment with your own palette.
• No Supports Needed! The print is designed to lay flat on the bed.

To support me and be able to sell my designs please go through my boosty: 

https://boosty.to/sul_

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 1.04mm
 

Filaments Used:
    #ffffff PLA Elegoo Matte White  Transmission Distance: 1
    #ffc2f4 PLA Elegoo Matte Pink  Transmission Distance: 4
    #b4f5fe PLA Elegoo Matte Blue  Transmission Distance: 6
    #090909 PLA Elegoo matte Black  Transmission Distance: 2.8
This print uses 4 unique filaments

Swap Instructions (you can add pause and swap filaments by yourself
    Start with White
    At layer #13 (1.12mm) swap to Pink
    At layer #19 (1.6mm) swap to Blue
    At layer #25 (2.08mm) swap to Black for the rest.