This is a threaded cap for a NESTOUT battery bank, with a hole at the top to allow a USB cable to be permanently threaded through it. This allows for:

• USB to be installed before installing the cap
• Better protection against debris and water

The threads are the most critical part of the model, everything else can be modified to meet your needs.

Cap dimensions:

• Outside diameter = 30.6mm
• Inside diameter = 26.6mm
• Inside depth = 40mm
• Height = 42mm
• Top Hole Diameter = 2.9mm
• Top filet = 2mm

Thread details:

• Diameter = 26.6mm
• Revolutions = 2
• Pitch = 2mm
• Angle = 0
• Section = Triangular (Internal)
• Section Position = Inside
• Section size = 1.3mm
• Operation = Join
• Starts 3mm from edge
• Starting point extruded 6mm