The Tevo Tarantula Pro is a great FDM printer, but unfortunately, some of the parts you will need or want to modify aren't included. Theoretically, you can print those parts yourself using the TTPro, but if you want that "factory look" for your parts, you'll need to use a resin printer. I used an Elegoo Mars, which I can highly recommend, but obviously, use what you want/have/need an excuse to buy... =)

Obviously, this button isn't strictly necessary, but it sure makes life simpler when you have to use the reset button! So I designed my own! No more paper-clips, screwdrivers, or other unsuitable tools poking down the hole in the front panel... Just push a button!

The STL file might need to be rotated in your slicer of choice so that the bottom of the button is facing down on the printing plate/base. See the attached image of the part placed in ChituBox for an example of what worked for me, and should work for you too. If printed with a resin printer, even when properly placed on the build plate, you will need to add supports and a raft to make the buttons stick to the build plate. See the attached picture for a suggestion on how to place your supports around the bottom edge. I wouldn't recommend printing this button on an FDM printer, or the TTPro itself, as you'll probably lose all detail on the button's label, but it's up to you!

Parts List *Amazon affiliate links

1x Elegoo Mars Printer (optional) https://www.amazon.com/ELEGOO-Photocuring-Printer-Off-line-Printing/dp/B07K2ZHMRF/ref=as_li_ss_tl?crid=16GA3G94OFHGC&keywords=elegoo+mars&qid=1569863753&s=gateway&sprefix=elegoo,aps,178&sr=8-3&linkCode=sl1&tag=falvesjr-20&linkId=76bb124dcc346e8d14528591c66f3794&language=en_US
1x Elegoo Clear Red Resin (optional) https://www.amazon.com/ELEGOO-Photocuring-Printer-Off-line-Printing/dp/B07K2ZHMRF/ref=as_li_ss_tl?crid=16GA3G94OFHGC&keywords=elegoo+mars&qid=1569863753&s=gateway&sprefix=elegoo,aps,178&sr=8-3&linkCode=sl1&tag=falvesjr-20&linkId=76bb124dcc346e8d14528591c66f3794&language=en_US