Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA JAYO Black Transmission Distance: 0.3
    PLA ESUN Fire Engine Red Transmission Distance: 4
    PLA ESUN

 Yellow Transmission Distance: 6
    PLA JAYO White Transmission Distance: 6
This print uses 4 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #20 (1.68mm) swap to White for the rest.

I added a 160x160mm Version with and without AMS