Project: sniper.hfp
Print with a layer height of 0.08 mm and a first layer thickness of 0.16 mm, at 100% infill.

The model size is 200x200mm.
At minimum depths of 0.48 mm or less, it is possible to use a larger layer height for printing.
The maximum depth is 2.2mm, and the actual depth is also 2.2mm.

Materials Used:
PLA smartfil Black transfer distance: 0.4
PLA BambuLab Basic Beige Transfer Distance: 8
PLA BambuLab Basic Emerald White Transfer Distance: 5
Three different types of consumables were used for this print.

Switching instructions:
Start with black.
Switch to beige at layer 11 (0.96mm).
Switch to Jade White for the remaining part on layer 20 (1.68mm)