A little robot body with a big angry block head. Also included is a tray that can be used to hold block heads from clay or make your design and print your own.  

The tray has a 50mm x 55mm opening with a 2mm radius.

The "neck" (upper connector in the files) is 37.25mm in diameter if you want to skip using the tray all together.

The arms are oriented to give best results for visible features. It may require a bit of clean up after removing the support material on the pin that connects to the torso.

Double the height of the lower connector to allow the tracks to clear the arms if you want to position them differently.

**Note that the one eye robot head is a puzzle called Bolt The Bot by RSinatra. Creating something to display the puzzle on was the impetus for making the robot body.  A model of it is not included.