Solo tres colores

Project: star wars.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 1.1mm

Filaments Used:
    PLA BambuLab Basic Pink Transmission Distance: 8
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Pink
    At layer #7 (0.72mm) swap to Black
    At layer #10 (0.96mm) swap to Jade White for the rest.