Projet: metroid 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 129.4x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.72mm

Filaments utilisés: 
    # PLA wanhao black  Transmission Distance: 0.1
    # PLA wanhao red  Transmission Distance: 2.8
    # PLA wanhao jaune  Transmission Distance: 5.1
    # PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    # PLA wanhao white  Transmission Distance: 3.8
This print uses 5 unique filaments

Instructions de changements:

    Commencer par wanhao black
    At layer #10 (0.88mm) swap to wanhao black
    At layer #19 (1.6mm) swap to wanhao red
    At layer #22 (1.84mm) swap to wanhao jaune
    At layer #25 (2.08mm) swap to wanhao black
    At layer #28 (2.32mm) swap to BambuLab Basic BambuLab Green
    At layer #31 (2.56mm) swap to wanhao white pour le reste.