I had pulled the center console out of my Chevy truck and one of the pins securing the front of it down was damaged, and wouldn't hold it all the way down. Upon measuring it, I realized it was similar in size to the fuel tank shield fastener I had already modeled. Making a few adjustments to that, I was able to make a functional replacement for the fastener that was holding my console down. Though it's different from the original, it still gets the job done.

Made to attach to a panel that is < 2 mm thick.
The pin is 9.3 mm in diameter at its widest point and 20 mm long.
The gap between the disc heads is 5 mm.
The disc heads are 19.4 mm diameter. Inner is 1.3 mm thick. Outer is 1.8 mm thick.
Shaft diameter between discs is 6 mm.
Shaft diameter at base of pin, where it meets first disc, is 7.6 mm.
Wall thickness of pin is 2 mm.

For those that do not want to sign up to download this, I have made it available on my Odysee channel...
https://odysee.com/@HOWIC:d/center-console-fastener:d