The design combines traditional Pueblo and Middle Eastern building techniques with modern digital fabrication goals.

Model Design Concept

The design focuses on passive environmental control and structural simplicity, which explains its specific visual features:

Vigas (Protruding Beams): These represent traditional wooden roof supports common in Adobe and Pueblo architecture. In this digital model, they serve a dual purpose: providing a signature aesthetic and potentially acting as alignment tabs or structural anchors if the model is printed in sections.

Thermal Mass Representation: The thick-looking walls and small, arched windows are classic "desert-tech". They are designed to show how a building would stay cool by minimizing sun exposure and using high thermal mass to regulate temperature.

Modular "Rational Structure": As mentioned in your second image, the model is likely designed as a "kitbash" or modular set. This allows different parts—like the vaulted sections and flat-roofed blocks—to be rearranged into various configurations.

Predicted Print & Assembly Strategy

Following the logic in your assembly instructions, this specific architectural model would likely be handled as follows:

Stage Likely Application for This Model

Printing The flat roofs and vertical walls make it ideal for support-free printing. The "vigas" (beams) would be the most delicate part, likely requiring the 60° angle supports mentioned in your text to prevent drooping.

Material A matte PLA in "Sand" or "Terracotta" would be used to mimic the natural adobe/mud-brick texture of the original inspiration.

Assembly The model likely uses the "slot" and "screw" system described. Individual rooms or roof sections would be printed separately and then slotted into a base or joined via internal 2.5mm holes to create a larger complex.