A1 Adapterboard

A1 Adapterboard is the adapter board for HDMI to CSI-2 boards (such as X630 or X1300) from Geekworm; in case you didn't buy the kit or you lost it. 
I don't know why there's no CAD file for this adapterboard officially. 

Preferably printed with heat resisted martial, such as PETG or ABS; those HDMI to CSI-2 boards do get hot. 

Part List

These are the parts I copied from the Geekworm wiki, might not fit your need. 

• 1 x 5cm Length 5pin 1.0mm FPC cable (for Pi 4B / 3B+ / 3B / 2B)

• 1 x 8cm Length 15Pin 1.0mm to 22pin 0.5mm FPC cable (for Pi Zero / Zero W / Zero 2W)

• 2 x M2.5*17mm Standoff

• 4 x M2.5*6 Screw

• 1 x M2.5 Nut

PoE Hat Config

This is my weird PoE hat configuration, which utilize the Waveshare PoE hat and the adapterboard.

It adds 1mm to the adapterboard to properly fit the standoffs on one side, as M2.5 brass standoffs only comes with even number length.

There's also a M2.5 washer you can print if you only need the washer.

Part List

• 1 x M2.5*20mm Standoff

• 1 x M2.5*14mm Standoff

• 1 x M2.5*4mm Standoff

Photos

Changelog

Release v0.1.0

• Add my weird PoE hat configuration