Regarding

A staff designed for wizards, witches, and mages. It's a great addition to fantasy role-playing games.

Printing and assembly instructions

The crown is the only component that needs to be supported. Print it upside down. Print the two middle end components. All rod body components should be printed vertically. I recommend using only the inner brim. If there are adhesion problems on the heatbed, you can try using the outer brim or glue.

The internal rods make the staff more sturdy than other threaded connected staffs. All components must be glued together.

Once all the components have been printed, the assembly process is quite intuitive and straightforward. Starting from the bottom of the rod, insert the internal rod parts and glue them in place. Add the end middle components, then the middle components, followed by the end middle components, and finally the top components. Add the internal rod parts and glue them in place along the way. This completes the rod body. I recommend first gluing the gemstones to the cage and letting them dry, then gluing the cage and gemstones to the rod body.

Simply print and add more intermediate components to easily extend the staff to the desired length.