Summary

An accessory to keep your putter grip dry when you place it on the ground for an approach shot.
It consists of a nut that clips onto the putter shaft and an arm that attaches to this nut.
The nut can be folded over the shaft or unfolded at a 90-degree angle. When unfolded at 90 degrees, it acts as a kickstand to prevent the grip from touching the ground when the putter is placed on the ground.
The nut is available in several diameters (13.0, 13.5, 14.0, and 14.5 mm). The overall design facilitates the putter's passage through the bag when stored.

Both parts are made of PETG to ensure good resistance to impacts and sunlight.
The parts were printed using a Bambu Lab P1S1 with a 0.4 mm nozzle and 0.28 mm layer height.

Printing time is approximately 1 hour. Supports are already integrated into the parts. They have to cut them out after printing.