Summary

I wanted to make a watch stand for my grandpa, so I designed one in Fusion 360.
I made a short material list so that anyone can make it.
Materials: Any color filament, almost any type of super glue, and up to 3 watches.
I also compiled some instructions for assembly.
Instructions: Insert files into slicer software, position branches on 1 of 2 flat faces on either side, print, put 1 branch in the top hole and bottom hole with the hole-shaped indent furthest from the stand and facing the same direction, put a branch in the middle hole with the hole still being furthest but the whole thing facing the opposite direction of the top and bottom so that that the watch bands don't scratch up the other watches, push all branches to be as close to flush with the stand as possible, glue them in place, and finally, display the watches. Also, if you want to, you can sand down the branches to be completely flush and glue on the inside of the stand. If you choose to do this, PLEASE wear a mask while sanding for safety. The microplastics could damage your lungs.