Description: This cradle is designed to neatly organize and hold four Baofeng radios Model F22 (commonly available on Amazon). Each radio slot measures 35 mm x 55 mm (approximately 1.38" x 2.17"), providing a secure fit.. The streamlined design ensures a stable base while keeping the overall footprint minimal.

Recommended Print Settings (Ender 3 Pro):

Material: PLA (or your preferred filament)
Layer Height: 0.2 mm
Infill: 20% (Cubic recommended)
Print Speed: ~50 mm/s
Nozzle Temperature: ~200–210°C (depending on filament brand)
Bed Temperature: ~60°C
Orientation: Lay the cradle flat on its base to minimize supports
Supports: May need minimal supports depending on specific overhangs
Adhesion: Use a brim or skirt if needed for better bed adhesion
Notes & Tips:

Confirm that the 35 mm x 55 mm (1.38" x 2.17") slot dimensions suit your specific Baofeng model.
A small amount of cleanup (light sanding or trimming) may be useful around the slot edges if necessary.
Ensure your bed is well-leveled and your filament is dry to avoid print quality issues.
Keep your radios organized and easily accessible with this multi-slot cradle! If you remix or improve this design, please share your make on Thingiverse.