Remix of Tripod Base for a Tau Lidar Camera.
 

• Link of The Onion Tau Lidar Camera 

https://www.digikey.com.mx/es/product-highlight/o/onion/tau-lidar-3d-depth-camera

This tripod variant can be fitted with a case that allows you to use the camera and protect it during operation.

The case is sliding, and also has 2 holes for M2.3x8 screws (an approximate measurement, I used some similar ones that I had in my box). In addition, it includes the space to connect the corresponding USB type C

I printed the tripod with the following parameters

• 25% infill
• Gyroid
• White PLA
• 210°C
• Use Supports (use your configuration that works best for you)

The case parameters (for both colors)

• 15% infill
• Gyroid
• White and Red PLA
• 210°C
• Use Supports (use your configuration that works best for you)