The cube's sizes are 50x50 mm. The textures included are Brick, Bubbles, Crystal, Carbon Fiber, Grip Surface, Hexagons, Isogrid, Noise and Wood 2. 

Recommended Print Settings:

• Layer height of 0.15 mm or below

• Relatively low speed for extra detail (30-60 mm/s)

• Any material is fine, though I recommend using PLA, as it has the best detail.

If you want every texture and smaller cubes, check out this model: 

If you want to use it on your own model, go to bumpmesh.com.

Happy printing!

-X3