Compact Low-Friction Filament Guide

This is a compact, low-friction filament guide designed to keep your filament feeding smoothly. It helps reduce drag and unnecessary resistance. DESIGNED FOR TOP MOUNTED SPOOLS.

Required hardware

• 3 x M4 heat insert 6mm long (shorter will work)

• 3 x M4 screws 15mm

• Short pice of PTFE tube (diameter ø4.5mm)

• 2 x M4 screws 10mm

• 2 x M4 T-slot nuts

Print settings

• Min. 4 parimeters

• Min. 4 Top and bottom layers

• Around 40% infill or thereabout

• PLA will work fine!

Feel free to remix or change my designs. STEP FILES INCLUDED!