This remix of a key-ring was used with a set of measuring spoons I made. Likely it is now too thick to be used as a key-ring for actual keys, but it works well for the measuring spoons I made.

Update April 14, 2026 : I added a slightly different second version (V02), with the ends of the rings a bit more form-fitting (see the CAD screenshot for the two versions side by side). It's a minor improvement, but an improvement (I think) nonetheless. 

You can find the measuring spoons here :

https://www.printables.com/model/1662420-measuring-spoons-teaspoontablespoonmetric 

Print Instructions

Print in PETG using the 3mf files provided, otherwise :

• 0.2mm layer height

• 4 perimeters

• no infill

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/a3b23e7ac50d857b080e79ef/w/ece745a64057866b61df5436/e/d76616760359d9d93a890dc9?renderMode=0&uiState=69cfa4a39b86f828e520c14e