I made this because I couldn't find a smaller version of the base frame that fit my print bed. I also didn't need it to be massive like the original and a faster print time.

This works for me with the same acupuncture needle probes and I've been able to flash a few Tuya chips this way.

The vice is made by mdkendall and the link is https://www.printables.com/model/133490-2inch-desktop-vise

The probe and the probe stands are made by giufini and the link is https://www.printables.com/model/351270-pcb-workstation-with-nano-probes

I would suggest trying out the needle probe with no support and adjustment knob made by blinkybill and the link is https://www.thingiverse.com/thing:4592185/files

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUT-small-pcb-holder/edit?sharecode=V73HihkRphiBYyvMsAfRpy2Cu4twX9f9VhLQdm2tAD4

.

Print Settings

Printer Brand:

Dremel Digilab

Printer: 

3D20

Rafts:

Yes

Supports: 

Yes

Resolution:

100

Infill: 

20

Filament: inland PLA grey

Notes:

I'm still dialing the printer in but these worked well.

Post-Printing =============

I'm going to assume your printer is better than mine and if the holes are a little bigger than expected, a little electrical tape or any tape around the stem will help.

I did have to sand the vertical stem of the crane to fit the crane base with handle.

How I Designed This

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUTA

Category: Electronics