This adjustable stand is designed to hold almost any model you can think of, using a sturdy but material-saving base plate, and movable and rotatable sliders and brackets to find the best position and make adjustments easily.

The base plate design is suitable for the Bambu Lab X1/P1 printers. If necessary, the size can be modified according to requirements and added to the file list.

Assembly instructions:

• The sliders and slider seats use fixed M6 nuts. Stop printing at the correct layer to insert the nuts into the parts.
• The bolt is pressed into the knob → Push the bolt into the knob and use a nut to tighten it to further pull the bolt into the knob
• ！When the bolt is already installed in the knob, the knob on the bottom slider is not suitable. Therefore, you need to align the knob with the slider first, and then push the bolt in!

Parts that need to be printed:

• 1 pieceThe base plate
• 8Knob
• 4Slider
• 4Slider seat
• 2V-shaped bracket
• 2Flat bracket

Additional hardware:

• 8M6x20 hexagonal bolt
• 8M6 nut