Project: Burning Skull.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 186.17x235mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.5mm and the Actual Depth is 2.4mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Orange Transmission Distance: 5

PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Blue

At layer #8 (0.72mm) swap to Red

At layer #13 (1.12mm) swap to Orange

At layer #20 (1.68mm) swap to Yellow for the rest.