Inspired by the model from 3D Brothers (https://makerworld.com/zh/models/631323-coin-trap), I couldn't find a coin trap suitable for US 25-cent coins, so I decided to make one myself.

This trap is very simple

**** Printing Instructions ******

Please use the .3mf file!- The .stl file does not have a function to pause the printing process to insert coins. You need to add this feature yourself during the slicing process. The .stl file does not support such functions. Please use a .3mf file instead.

There is a pause about three minutes before the end of the print for the .3mf file. At that time, you will put in a 25-cent coin. This is just before the top closes. Make sure the coin slides smoothly to the bottom to avoid interfering with the print.

I'm printing on the Biqu Cryogrip print board. I don't need a brim. Even on a textured print board, you...MaybeIt's not necessary either... But the specific situation may vary from person to person. This is a concise and to-the-point printout. Make a decision that suits you and take responsibility for your choice.