Project: venom.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 92.34x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2mm

Filaments Used:
    PLA Sunlu Meta Black Transmission Distance: 1
    PLA Sunlu Meta Grey Transmission Distance: 3.5
    PLA Sunlu Matte White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.8mm) swap to Grey
    At layer #16 (1.44mm) swap to White for the rest.