Wall lamp
khakicable3
Find Similar with AI
Print Profile(0)
Model File(0)
0
0
0
Published:2021-12-23 14:11:11
0
0
000Description
Tags
Model Source
Reviews(0)
Summary
Additional you need:
- Two M3 10mm screw;
- Two M3 16mm screw;
- Two M3 12mm screw with 45degrees head.
- Four M3 nuts;
- Bulb holder E14;
- Two WAGO connector for two wire.
Print Settings
Printer:
Flying Bear 5s
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
30%
Post-Printing
Step 1
Mount lamp holder to the wall. Insert two M3 nuts before.
Step 2
Next step is attach all parts into one
Step 3
First of all attach bulb holder into plate.
Step 4
Next step put nuts into lampshade.
Step 5
The next one, insert the cord into the hole.
Step 6
Then, insert the cord into hole in lampshade.
And screw it.
Install a lamp.
Step 7
Put 16mm M3 screw into lampshade holder and screw it with lampshade. In the end you should have this.
Step 8
Attach WAGO connectors like on image.
Step 9
Then, connect a lamp with WAGO connector. Prepare two 12mm M3 screw.
Step 10
Screw bolts in top and the bottom of holder.
Voila, you have a great wall lamp now )
Optional, repeat all steps for the second lamp.
Voila, you have a two wall lamps now )
Tags
Model Source
Original Link: View details
CC BY