Kort Nozzle
Daisy Bergman
Find Similar with AI
Print Profile(0)
Model File(0)
0
0
0
Published:2017-05-18 00:37:29
0
0
000Description
Tags
Model Source
Reviews(0)
Summary
This is a Kort nozzle for RC model boating. It is designed for a Dumas 1.5-in. propeller.
ABS filament was used.
It uses a 1/8" control rod above the nozzle and a stabilizing rod at the bottom. The top of the nozzle is marked with a small T and inside is a notch to prevent the nozzle from spinning on the control rod. I found that there was still too much play in the control rod, so I drilled a small hole through the nozzle control sleeve and the control rod then inserted a small (1/16") wire through the holes.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
Yes
Tags
Model Source
Original Link: View details
CC BY