This is a mount used to go with Christmas Star designed by PaulIM. Instead of printing 12, print 11 and attach this as the twelfth. You can use the mount to either attach it to the tree or as a lamp (with stand to make it sturdier)

For each star you have to drill a 3/16 hole for the Christmas lights or I used a solder iron to puncture a hole. I printed in ABS and glued the 5 of them using acetone to make a ring. I attached the base to one of the centers and ran the lights through it.

• The hexagon base is to convert the mount into a stand. There is a cutout for the wires on both the stand and mount; just align them and glue them together.

• I've also attached a remix star. This star is a thicker with an opening in the middle. I used this as my top point. I needed the extra room for the light and wires.

Anet A8

No

No

2

10%-20%

I would print using a high temp filament like ABS or MakerGeek PLA just incase the bulbs get to warm.