Cable storage (wire holder; flexible wrapper). Printed from TPU 85A, could possibly work with other flexible filaments.

Folded when printed, unfold to reveal the spool. Holes can be used to secure the first end of the cable. After winding the cable, close it by folding the wrapper back. Fits well with a 1.8 or 2 meter USB cable at 100% scale.

Note: when unwinding, if you want to avoid the cable from getting tangled, you can unfold the wrapper and then unwind the cable like a tape measure.

Printed with a smooth surface (The seam may be clearly visible):

Printed with dragon skin (separate file):

Printed with PrusaSlicer Paint-on fuzzy skin:

Versions (see the endings of the file names):

• v.1 - Larger overall volume, can tightly accommodate 3m cable. Four holes in the spool. Thicker outer walls. The thickness of the outer and inner walls is the same.

• v.2 - Outer walls are thinner for greater flexibility. Inner walls are thicker. Two large holes in the spool.

• v.2.1_dragon-skin - Thick textured outer walls.