This stand works great if you have a Versa with a one-piece band, like e.g. a deployment band like the one in the photos, which can make it difficult to connect the watch to the charger - this way the charger cord is kept out of the way and the Versa slips very easily onto the charger. This stand might work if printed with PLA, but ideally I'd recommend printing the cradle with a material with some flex, because the lower arm has to be bent slightly outward so that it can slide over the charger - it's a VERY tight fit and the charger is locked into place very solidly. I used PETG and it worked great. Print the base, base cover and curved arm with supports; the other parts can be printed without.
EDIT 12/10/18 - I uploaded a revised version of the cradle, which is a fraction larger top to bottom, so not quite so tight a fit on the charger, though it's still very snug - the last one worked okay but there was a lot of strain on the brackets, so this one should be stronger.