This project was a request for a wall mount to store and display walking sticks. Other uses could include umbrellas, kendo swords, bats, unstrung longbows, arrows, and more or less anything that can fit in the hole and rest on the bottom that's not crazy heavy and straight. Inspired by the forest and the long walks they take us on. A total of 3 prints for one set of holders. 2 screws are required and studs or drywall ankers for optimal strength. I printed them in three colors and the result is amazing. Simple assembly. The base is printed into 2 parts so I can have the layer orientation optimized for the strength of each part's needs. Slide the ring through the back of the flat stump. It's a tight fit and may need a tiny bit of sanding depending on the slop left by the printer. I hope you enjoy :)