The seeder is an agricultural device used for the even distribution of seeds. The key component of the seeder is the seed wheel, which determines the spacing between the seeds sown. For the seeder to operate effectively, the seed wheel must be well-matched to the type and size of the seeds. Therefore, selecting the appropriate seed wheel is crucial for the efficiency of seeding. Components needed for the project: Bearing 47x35x7 Bearing 24x15x5 2 screws M8 L=30mm 6 screws M4 L=30mm 6 brass threaded inserts (insert) Broomstick 25-22mm Printing Models have been well optimized for 3D printing. Recommended settings: Material: PLA or PLA+ Layer height: 0.2mm Thickness: 3-4 outlines with 20% infill