As you can see, the holder, well, holds a remote. It can probably hold other items as well. For now, it's a remote holder :) 168 x 60 x 80 but you should be able to change those measurements a little. I only did the one print as I was late to the party and afraid I still am sooo I printed it all at 0.3. I didn't really have a plan where I was going with this from the beginning, I have been busy elsewhere and just wanted to pump out a model lol. I'm also fairly new to Blender, so that was a mission on it's own, attempting to extrude things here and bevel things there. In the end, I made a usable item. It took roughly 5 hours to print. The settings will be able to get tweaked to make a cleaner, faster print. I'm also new to 3d printing so bare with me :) Slicer: Creality Print Filament: eMarble Layer Height: 0.30 Speed: 180mm/s Support: Tree Strong, Touching Build Plate Print Temp: 210 Bed Temp: 60 Bed Adhesion: Raft Everything else was default If you do download, play around with your slicer settings, you will probably get a better result.