Pirate Hueforge

Project: Pirate 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Brown Transmission Distance: 2

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Brown

At layer #14 (1.2mm) swap to Yellow

At layer #18 (1.52mm) swap to White for the rest.