Project: 123.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x155.33mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

    PLA PolyLite Black Transmission Distance: 0.3

    PLA BambuLab Basic Pink Transmission Distance: 8

    PLA PolyLite White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

    Start with Black

    At layer #10 (0.88mm) swap to Pink

    At layer #23 (1.92mm) swap to White for the rest.