Don't adjust the size in the slicer!! These layers won't display correctly.

Please do not change the size, as this will lead to color change errors, which will affect the overall printing effect.

Use my print configuration file, otherwise you won't be able to get the desired results.

It can be safely printed on any printer without AMS.

I hope you like it. If you want to support me, please leave a like and give it five stars. Thank you!

Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm

The dimensions of this model are 180x254.36 mm, and you can achieve a tolerance of less than 0.48 mm.

It can print at a higher layer height, with a maximum depth of 2.2 mm and an actual depth of 1.9 mm.

Consumables used:

PLA BambuLab matte charcoal

PLA BambuLab Basic Silver

PLA BambuLab matte ivory white

PLA BambuLab matte scarlet red

This print uses four unique fine lines

Exchange instructions:

From charcoal

Start switching to silver on the #7 layer

Switch to ivory white at layer #10

Switch to charcoal at layer #13

Switch to scarlet red on the #15 layer

On the #21 layer