Thunderbolt lamps printed by the People's Liberation Army.

It uses Amazon's COD LED bulbs: https://www.amazon.de/dp/B0CSFRFGNF?psc=1&ref=ppx_yo2ov_dt_b_product_details

It's better to cut it into small pieces and then stick it to the backplate of the cloud and thunder. After sticking it, weld it together until the backplate is completely covered. Of course, you can use all other LED strips, just pay attention to the possible cutting length, and you can power the LED strips perfectly.

Because the LED strips I used only require +5 VCC and GND. Therefore, at the bottom, a GND and +5 VCC are soldered to the controller's cable. The glue used in this project is "UHU Allplast", which can be found on Amazon. However, other glues used for 3D printing may also work. To solder the individual strips together, I used 0.14mm² copper wire.

I will respond to any task as soon as possible.

Import: If you don't use the printer configuration file, please print all parts with 100% infill. Otherwise, there might be shading of the infill pattern inside the parts. The "Thunder Bracket" doesn't use 100% infill, but instead uses 50% infill to save material while still making it heavy enough. For the PLA colors, I used white for the clouds and the standing part, and bright blue for the lightning. The bracket is sprayed with matte black.