When using TPU, it's best to use a 0.6 nozzle

EU size conversion chart:

---

Setting of Anycubic Slicer Next/Bambu Studio/Orca slicers:

Globally, Tryton_1:

 

- Floor height: 0.28mm

- Sparsely filled line width: 0.9mm

- Line width of the wall: 0.65mm

- Wall circuit: 0

- Top shell layer: 0

- Bottom shell layer: 0

- Sparse filling density: 43%

-Fill pattern: grid

- Filling anchor: 1000

- Maximum fill anchor: 1000

- Filling direction: 0°

-Fillers/wall overlap: 90%

- Detection of narrow internal solid fillings: None

- Sparse filling speed: 18 mm/s

- Reduce the shrinkage of the filling material: No

-Brim type: outer layer, 9mm wide, with a 0mm gap

-Enable support: Yes, normal, automatic, 1°, make a 100x150 support for the actuator

Tryton_1_1:

-Walls: 2

Tryton_2:

-Walls: 3

Tryton_3:

- Sparse filling density: 33%

- Sparsely filled line width: 0.65mm

Filament:

- Contraction: 2.4mm

-Wiping: None

-Z jump: 1.2mm, standard type

- Maximum volume velocity: 4.8 mm^3/s

---

Video 1:https://www.youtube.com/shorts/FZKIXf9nNCU

Video 2:https://www.youtube.com/shorts/_bgXucTOz3k