Fits the Nelson Garden Rootmaster (https://www.nelsongarden.se/produkter/minidrivhus-rootmaster-p5685/). Has venting holes on the sides just like the original trough and lid.

Print upside down (as it is oriented in the stl file) in two parts, and then either glue them together or use in two parts as is.

Can be printed either with transparent or normal filament as desired. For transparent filament, I still recommend keeping the fan on to reduce warping of the thin walls.

I printed it in transparent PETG and in green PLA (0.2 mm layer height, 5% infill).