Decorative butterflies

Print with a 100% infill rate, a layer height of 0.08 mm, and a base layer of 0.16 mm

Consumables used:
The PLA smartfil is black, and its transmission distance is 0.4 meters.
The PLA filament is red, and its transmission distance is 2.3 meters.
The PLA filament is orange, and its transmission distance is 1.2 meters.
The PLA filament is yellow, and its transmission distance is 5.8 meters.
The PLA filament is white, and its transmission distance is 6 meters.

Switching command:
Starting with black
Switch to red on the 7th layer
Switch to orange on the 11th layer
Switch to yellow on the 14th layer
On the 17th layer