Summary

This device can help you practice your split flexibility for any kind of sport or martial art.

Printing:

• Print with PLA.
• 25-30% cubic infill
• The hinges are printed in place
• Use tree supports

Besides the printed parts you are going to need:
2 x Standard broom sticks (1 inch thick)
2 x 6mm flat screws
2 x Any regular screw (1 inch long max)
1 x rope

To assemble it, cut a part of each broom to about 15cm (from the end of the stick). Use that part as the leg holder.
Attach the screws and insert the rope at the hold in the middle.