Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 114x195mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 4

PLA PolyLite White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #12 (1.04mm) swap to White for the rest.