is for mMy designakers to share their love of making by wearing this shoe charm. The simple message "I AM A MAKER!" is available to print, wear, and express yourself with. Feel free to modify and remix to make it your own.

Print Settings:

My recommended print settings are 10% infill, with .6 mm line width, with 2 lines, .15mm layer height if you have a 0.6 nozzle if you have a 0.4 nozzle I recommend a 0.42 mm line with with three walls,and a 15 layer height and 7 top and bottom layers. No supports are needed. I recommend printing slow and for the Ender-3 v3 SE I use 120mm/s for infill, 90mm/s inner wall, 80 mm/s for outer wall, and 45 mm/s for bottom and top layers. Combing setting on all. If arachne is available turn it on. Make sure to orient print with the face of the charm flush with the bed.