This is cap for front brake tank of YAMAHA XJ600 Diversion 1996y. Geometryically is the same like original one. Seal fit good and there is no leakage. In addition I made a logo placed on the top of cap's surface.

Creality

Ender 3

No

No

0.16

100%

Cap should be printed with temp. 210*C minimum to good layers adhesion. The best quality of this part is obtain under 0,2 mm layer thickness. Place model on flat surface on your printed bed and use BRIM (7-10 brim line count) as a build plate adhesion setting. Printing speed : 30 mm/s and acceleration : 160 mm/s2 are recommended . Cooling fan 100%. Good luck!