ZLED - 4 Channel ESP32-WROOM hat - For controlling WS2812, WS2812B, and other addressable RGB LED Strips.

ESP32-WROOM, MIMS Mic, and IR bug, are all removable, replaceable, and MIC/IR are optional.

Shifted on all 4 channels to allow up to 50ft of cable between board and first LED without timing or color issues.

Specifically Pinned ESP32-WROOM dev units must be used. Same with Mic.

ESP32-WROOM - ATRIP
https://www.amazon.com/gp/product/B0B11N1X8R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

MIMS Mic - ATRIP
https://www.amazon.com/gp/product/B092HWW4RS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Remote Control and IR bugs, robbed from these COB strips (That also work with this board)
https://www.amazon.com/gp/product/B0CH149KMC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Molex connectors are used to carry the 5 amps per channel. RoHS compliant, thermal simulations performed, safe for use in any dry environment up to 20a MAX per board.

Connectors and Pins:

Connector:
https://www.mouser.com/ProductDetail/Molex/43645-0300?qs=W6FIH8d5%2F%2F06ciSdVM35nA%3D%3D

Pins: CUT Strip or Individual (Price increases)
https://www.mouser.com/ProductDetail/Molex/43030-0001-Cut-Strip?qs=LVm7ROZMjqOG%2FpR3agpKGQ%3D%3D
or
https://www.mouser.com/ProductDetail/Molex/43030-0007?qs=MuwpYaHj75276x2HQaDYIw%3D%3D

BoM included in Zip, along with all needed PCB production files to make this board.
I use mouser to source all my components. Less expensive than digikey by nearly 50% on this board specifically.

Stencil is recommended, hot plate or oven reflow is recommended for all SMD components.

Board schematic and diagrams included will show you the pinout of the extra pins to the solder able pads on the board for expansion. DMX, Sync, CAT5, Hyperion, ETC.

This board is specifically designed to be built into other products. Lamps, Tables, Display cases, Signage, Undercar kits, Matrix displays, Etc.

Mountable ZLED case files included to house, protect, and mount the board into needed locations.

Recommend using a sound reactive WLED build, and a json 38 button White Remote. (Included with COB strips, Cut IR bug away from COB controller, and steal remote. Wire IR bug to JST XH 2.54 type connector, Paying attention to polarity.)

https://kno.wled.ge/
https://install.wled.me/
https://kno.wled.ge/interfaces/json-ir/json_infrared/

Free to use in your commercial projects with Attribution. ;-)

I will happily respond to any questions about the board or its correct use.

Preassembled boards are available. Online board shop coming soon!