Intel/Altera Max10 FPGA dev board enclosure
DriftCrow
Find Similar with AI
Print Profile(0)
Model File(0)
0
0
0
Published:2020-09-05 03:14:53
0
0
000Description
Model Source
Reviews(0)
Summary
Enclosure for the Intel/Altera Max10 FPGA dev board (part # DK-DEV-10M50-A).
The "Max10 FGPA" file is the original, designed by Sean Salinas at NMT.
The "Max10 FGPA short" file is my modified version. The walls are thinner (1.2mm for an even 3 shells using a standard 0.4mm nozzle) and shorter by about half to reduce unnecessary plastic usage.
Both cases provide access to all ports and the switches on the bottom of the board. Put the standoff pegs in the octagonal slots, then place the board on top and secure with screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
N/A
Notes:
Print at 0.28mm layer height with at least 2 walls/shells. This should eliminate any infill, so infill settings are irrelevant. No supports necessary, the component cutouts should bridge easily on a well-calibrated printer.
Model Source
Original Link: View details
CC BY-SA