I needed a simple mount for a NEMA17 to a piece of 2020/2040 extrusion. I wound up with an OpenSCAD design that can configure a few different ways. I needed a 2mm thickness for a Titan extruder, and that's a little wobbly, so I added crude bracing which helps. If you do the right angle, you'll need supports.

Print Settings

Printer Brand:

Anet

Printer:

Rafts:

No

Supports:

Resolution:

0.15

Infill:

Filament: Generic PETG

Notes:

Category: 3D Printer Parts