Bowl with a simple and elegant shape made with two ovoids with a bottom, one external and the other internal. I"ve attached the design file from Freecad for anyone who wants to make changes. It is made of PETG, I didn"t use a support but I recommend you to use a support, because at the bottom the inclination is large and it came out a little deformed. I"m lucky that I used a lower temperature of 235 degrees instead of 245 as usual, because it would have deformed more pronounced. The PETG from Jayo is clearly of lower quality than the one from SUNLU, it leaves traces of material (thin threads) and when I changed it with ABS even if I used 260 degrees the nozzle was not completely cleaned.   I had burn deposits and had to clean the extruder by hand. It contains recycled, it doesn"t bother me, but it doesn"t use a stable recipe you can rely on, the black was fluid, the green was better and the white in between in terms of quality. The print took 4 hours and 30 minutes, was tilted at 45 degrees to fit on the turntable of my car, and weighs 180 grams. I like the shape, I"m happy with how it turned out and I hope you like it too.