An advanced overhang test to accurately specify what angle you can print overhangs at, depending on what printer and material you are using.

it uses a small amount of material of around 5-15g, depending what size you print, and it tests overhangs ranging from 45 degrees, all the way up to 80 degrees, this print can be a torture test for your printer since it also has many small towers to test your retraction settings, as well as if you need z-hop or not.

this also tests bridging, where for smol print, it has a maximum bridging distance of 56mm, and each overhang width is 7.5mm, for the normal size, the maximum bridging distance is 76mm, with 10mm overhang width.

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2

Infill:

Category: 3D Printing Tests