Scale window nets for the TRAXXAS UDR. 

Printing Instructions

• Material: TPU (I used 95A, but any durometer will work) 
• Layer height: 0.15-0.30mm 
• Walls: 1.2-1.8mm (3 to 4 Loops) make it solid
• Infill: 100% (should be solid with walls)
• Support: Disabled 
• Orientation: As show below
  • **Make sure the “netting” doesn't have a gap to the bed.
  • 

Hardware

Traxxas recommends 8x m2.5 x 8mm (TRAXXAS Window nets for the UDR) 

If you don't have any m2.5 screws on hand m3 will work! 

8x m3 x 6mm BHCS (button head cap screw) this is what i used on mine!

Assembly

1. Remove the body - This video from Traxxas shows the process How to Remove the Body | Unlimited Desert Racer
2. Remove the scale interior 
   1. the top X-Brace will need to be removed
3. Install the window nets
   1. Will require a little stretch to get the screw holes to line up
   2. The Screws will self tap into existing holes in the UDR frame
4. Reassemble